No matter the job, if circular saw blades are involved, there is a need for maintenance. Even if used little, the blade must still be taken care of properly. So, if you’ve been wondering how to clean circular saw blade effectively, this guide showcases the safest and most efficient way to keep your equipment in top-notch condition. With my 6 step-by-step tips, your saw blades will retain their sharpness and increase their stamina, meaning that they can keep cutting effectively for longer. It’s important to note, though, that this requires some prep work. So make sure you have the right tools at hand, unplug your saw before dealing with it, and you’ll be ready to start.
How to Clean Circular Saw Blade in 6 Steps
Cleaning a circular saw blade, like any tool, is an important part of keeping it working efficiently and safely. With just a few common tools, you can easily and quickly clean your own saw blade in just 6 steps and keep it in great working order. Without further ado, let’s get started!
1. Gathering the Necessary Tools
Gathering the necessary tools for cleaning a circular saw blade is the first step in the process. While the exact items needed will vary depending on the type of circular saw and what is being cleaned, there are a few basic items that should always be used when cleaning a saw blade.
These include:
- Gloves
- Safety glasses
- Screwdriver
- Cleaning cloths
- Soft bristled brush
- Degreasing cleaner
Gloves protect your hands from bodily injury that may occur during the cleaning process, as well as from any sharp objects that may be present on the saw blade. Safety glasses should also be worn to protect your eyes from debris or dirt that may be kicked up during cleaning.
A screwdriver is necessary for disassembling the saw blade, while the cleaning cloths will be used to wipe away dirt and debris. A soft bristled brush should be used to gently scrub away dirt and grime that may have built up on the saw blade. Finally, a degreasing cleaner can be used to help further clean the saw blade, and will help remove any oil or grease that may have built up on the saw blade.
Gathering all of the necessary tools for cleaning is an essential first step in the process, and will help ensure that the saw blade is cleaned properly and safely. Taking the time to gather the necessary items for cleaning ahead of time will save time and energy during the actual cleaning process.
2. Unplugging the Circular Saw
The first step in cleaning a circular saw blade is to unplug the circular saw. This will prevent it from accidentally turning itself on and harming whoever is handling the saw blade. Wear protective gloves in case the blade is still hot and safety glasses to protect eyes from dust and debris. Loosen the bolts for the saw blade using a screwdriver, then carefully remove it from the saw. It is important to be careful and not force or pry the blade from the saw as this can cause damage to the saw. Finally, gently set the saw blade aside and make sure the saw is unplugged.
3. Disassembling the Circular Saw Blade
Disassembling the circular saw blade is an important step in cleaning and ensuring it runs safely and efficiently. It’s not difficult and just requires a few common tools:
• Gloves
• Safety glasses
• Screwdriver
• Cleaning Cloths
Start by laying the circular saw blade flat on a clean surface. Make sure it is stable and secure before proceeding. Begin by using a screwdriver to remove the bolts from the saw blade. Use caution when removing the screws and be sure not to overtighten them. Once the bolts are removed, carefully separate the pieces. Note any corrosion or damage as you inspect each piece.
If necessary, clean each piece individually using a soft cloth and degreaser. Focus on removing any dirt, dust, and grease buildup. This can help the blade move more smoothly and improve the overall performance. Take care to avoid using harsh chemicals or abrasive cloths that could damage the blades.
Once everything is cleaned, use the screwdriver to put the pieces back together in the same order they were taken apart in. Be sure to securely fasten the bolts and make sure they are tight. Replace any bolts that are too worn or corroded.
Once everything is reassembled, the circular saw blade is ready to be put back into the circular saw. Make sure that all parts have been securely tightened before putting the blade back in the saw.
4. Cleaning the Circular Saw Blade
Cleaning a circular saw blade is a critical part of keeping it in proper working condition. To properly clean it, use a soft bristled brush and degreasing cleaner and take the following steps:
1. Use the brush to scrub off any sawdust, dirt, and debris from the blade.
2. Dip a rag or cloth into the degreasing cleaner and wipe down the saw blade until it is clean.
3. Make sure to wipe down both the front and back of the blade.
4. Use a dry cloth to pat the blade dry.
5. Repeat this process as necessary to get the blade as clean as possible.
6. Make sure all of the cleaner is removed from the blade to avoid it reacting with the metal.
Take special care to clean around any moving parts and in any grooves or hard to reach areas. Be sure to be extra gentle when wiping the blade with the degreasing cleaner. If the blade is really dirty or has a significant buildup of grease and dirt, it may be necessary to use a metal polish or metal cleaner. These cleaners may be abrasive, so it is important to use them sparingly and only when absolutely necessary.
5. Reassembling the Circular Saw Blade
Reassembling the circular saw blade is easier than it sounds. All it takes is a few easy steps:
- Secure the blade pieces into the proper place on the saw.
- Tighten the screws securely.
- Make sure the blade is spinning freely and securely in place.
- Check for any places where the blade could come loose or cause harm.
- Check for any remaining debris.
These steps are important for making sure the saw blade is properly reassembled and ready to be used. Take your time and read the manufacturer’s instructions carefully to guide you through the saw blade reassembly process. Checking for any damages or imperfections in the blade itself is also important before reassembling. Doing so could help you prevent any potential problems while using the saw.
Once all of these steps have been taken, it’s time to move onto the final step: testing the saw blade.
6. Testing the Circular Saw Blade
Test the circular saw blade by turning it on at low speed and making sure the blade is spinning smoothly and not catching on anything. If the blade appears to be wobbly, check the mounting bolts for tightness. Ensure that the blade has a full revolution in both directions for best performance. After testing, turn off the saw, wait for it to stop completely and unplug it. Store the saw in a cool, dry place, away from dust and debris.
Regular cleaning and maintenance of a circular saw blade will ensure it is running smoothly and safely and that cuts are accurate. Following the 6 easy steps outlined here will keep the saw blade clean and properly functioning for years to come.
Frequently Asked Questions
What is the best thing to clean saw blades?
The best thing to clean saw blades is a petroleum-based cleaner, such as WD-40, or a mild solution of warm, soapy water. Be sure to rinse off the soapy solution and dry the blade thoroughly before storing the saw.
How do you clean a circular saw cut?
To clean a circular saw cut, you should use a chisel to sharpen the cut and then use a vacuum to remove any sawdust or debris. You should also take care to inspect the cut for splinters or jagged edges, and adjust it as necessary. Finally, use some wood glue or sealant to fill in any gaps or cracks.
Will wd40 clean saw blades?
No, WD-40 should not be used to clean saw blades. WD-40 is a lubricant, not a cleaner, and it is not designed to remove debris off blades. To clean a saw blade, you should use a degreaser and a soft brush.
How do you remove resin from a saw blade?
To remove resin from a saw blade, you will need a few basic tools. First, start by using a wire brush to scrub off any loose debris or sawdust. Next, use a damp cloth to wipe down the blade. Next, you can use a scraping tool or razor blade to scrape off any residual resin. Finally, you can use your saw blade’s grinding stone to grind away stubborn resin bits.
Last Words
The process of how to clean circular saw blade is not complicated and can be done with just a few common tools. Whether you are an experienced professional or a beginner, it is a very important task to do in order to keep the circular saw blade running efficiently and safely. Cleaning a circular saw blade in 6 steps is sure to help get you started quickly and keep your project on track. By following the steps and maintaining the circular saw blade regularly, you can continue to experience smooth and accurate cuts and extend the life of your tool.
